Pack Builder/Maintenance Assistant

Job Summary

Individual must have a general knowledge of machine operations, and an eye for detail. Must be able to lift 65lbs on a regular basis and have the basic knowledge of crane operations. Basic electrical experience of 220 volt and 480 volts electricity a plus. Be willing to understand the operations of the spinning process and the effects there of.

Basic knowledge of mechanical repair. Basic responsibilities:

1. Removal of the packs from the 3rd floor.
2. Installation of packs on the 3rd floor.
3. Trouble shoots heaters and temperature probes.
4. Clean and rebuild packs for the next maintenance cycle.
5. Spin pump removal and installation.
6. Spin pump cleaning and assembly.
7. Work with spin shafts and gear boxes.
8. Fork lifts operations and experience.
9. Learn the operation of an oven for burning out packs pumps and filter housings. Job Qualifications:
10. Must be able to lift 65 lbs
11. Must have good time management skills to get the packs done in a timely manner
12. Must be able to work with minimum supervision
13. Must be familiar with electrical/battery/air operator power tools
14. Must be familiar with hand tools to take packs apart
15. Must be computer literate so reports can be made and emails read
16. Must be able to work overtime on maintenance cycle days
17. Must be able to drive a forklift truck or be willing to learn
18. Must be able to follow verbal/written instructions for maintenance procedures
19. Must be able to accepted that being dirty is part of the job as pack tear down and building of packs
20. Must be have full body motion, to include bending, lifting and climbing of steps without assistance
21. Must accept that you can be called in to work on days off if maintenance emergency happens
22. Must be willing to do other jobs in the plant beside working with packs and pumps
23. Maintenance background preferred Please reply with resume