Electronics Engineer
$99,954
Against the United States typical range
Job description
You will serve as a Electronics Engineer. This position is located within the Department of the Interior, Bureau of Reclamation, Great Plains Region, Engineering Group, Mills, Wyoming. First time hires into the Federal government usually start at step 01. Some of the major duties you will perform include but are not limited to the following: The incumbent performs professional electronics and electrical engineering, technical support, policy implementation, and program guidance and oversight for the Data Acquisition and Endpoint Management system and the Wyoming-Montana Electronic Access Controls and Surveillance System. Updates and assures the operational reliability of the systems hardware and software for the control center, powerplants, dams, and communication sites. Responsible for engineering procurement, installation, and maintenance of hardware, software and firmware associated with the OT systems and remote terminal units (RTU's). Makes recommendations for improvement and expansion of the OT system. Personally performs network management, local software modifications and incorporation of new hardware, and participates in drafting technical specifications for such work done by contract. Designs and prepares technical specifications for additions and/or modifications to the communication networks which includes an extensive microwave system that is integrated with Western Area Power Administration's network. The network also includes optical transport systems, multiplexers, network switches, software-defined networking (SDN) infrastructure and firewalls for the operation of a mobile radio system, telephone system, telemetry systems, fire alarm and security systems, and various other electronic equipment used to operate and maintain the water and power facilities. Duties will be developmental in nature when filled below the full performance level. This is an open continuous vacancy announcement. The first cut-off date is 11:59 pm ET, 12/8/2026. Initial consideration will be given to candidates whose applications meet all qualification and/or eligibility requirements and are received by the first cut-off date. Applicants will be referred periodically throughout the announcement period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement.
Requirements
Continued... Under applicable law, the employment of an individual serving a probationary period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.
Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
Qualifications
All qualifications must be met by the closing date of this announcement-03/31/2027-unless otherwise stated in this vacancy announcement. To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience.
Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.
Minimum Qualification Requirements : To qualify for this position, you must meet the following minimum qualifications: Basic Educational Requirement AND/OR Specialized Experience for the series to which you are applying. Basic Educational Requirements : In addition to the specialized experience requirements for this position, you must meet at least one of the following: Successfully completed a bachelor's or higher degree in Engineering in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET).
OR Successfully completed a bachelor's or higher degree in Engineering that included differential and integral calculus and courses (more advanced than first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.
The courses must be fully acceptable toward meeting the requirements of an engineering program as described above. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.
Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive). -AND- To qualify for the GS-11 level : Applicants must possess one year of specialized experience equivalent to at least the next lower grade level GS-09 in the Federal service.
Specialized experience for the GS-11 is experience in conducting preliminary investigations and analyses relating to systems integration in connection with systems installations; preparing design criteria for smaller or less complex electronic equipment portions of facilities; developing technical data for formal specifications regarding materials, sizes, dimensions, quantities and costs; designing and constructing electronic systems and components; assist in troubleshooting existing installations and providing technical operational support for the industrial control system.
OR 3 years of progressively higher-level graduate education leading to a Ph.D., or I have a Ph.D. or equivalent doctoral degree in engineering or a related field which provided the knowledge, skills and abilities for the position. OR To qualify at the GS-12 level : Applicants must possess one year of specialized experience equivalent to at least the next lower grade level GS-11 in the Federal service.
Specialized experience for the GS-12 level is experience designing and developing unique and original electronics systems; analyzing specifications data sheet and drawings to determine applicability; conducting studies for extensive modifications of major components of electronic equipment; developing test and evaluation procedures for electronic systems and equipment; and troubleshooting existing installations and providing technical operational support for the industrial control system.
Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, Ameri. Corps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
You will receive credit for all qualifying experience, including volunteer experience.
This position has a mandatory education requirement. You must submit a copy of your transcript(s) to support claimed education if substituting education for experience. Transcripts must include your name, school name, grades, credit hours earned, major(s), grade point average or class ranking, and date the degree was conferred, if applicable.
A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not qualified for the position. Unofficial transcripts are acceptable, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work.
Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.
S.
Education
programs. Recognition of Foreign Qualifications | U.S. Department of Education. How do I receive credit for a college degree obtained in a foreign university in another country?
- OPM.gov Applicants must submit all necessary documents to a private U.S. organization that specializes in interpretation of foreign educational credentials, commonly called a credential evaluation service. To be acceptable, the foreign credential evaluation must include/describe: The type of education received by the applicant; The level of education in relation to the U.S.
Education
system, and state that its comparability recommendations follow the general guidelines of the International Education Standards Council; The content of the applicant's educational program earned abroad and the standard obtained; The status of the awarding foreign school's recognition and legitimacy in its home country's education system; and Any other information of interest such as what the evaluation service did to obtain this information, the qualifications of thee valuator, and any indications as to other problems such as forgery.
Foreign credential evaluations that do not contain the above information or that state there is insufficient information provided by the applicant on which to base an evaluation should not be accepted. If the requested evaluation shows the foreign education to be legitimate and comparable to that expected of a candidate with U.
S. credentials, it may be accepted at the discretion of the agency.
Description copied from Bureau of Reclamation's careers page. Read the full posting before you apply.
More jobs at Bureau of Reclamation
Safety and Occupational Health Specialist
Bureau of Reclamation· Lakewood, Colorado· From $100kBiologist
Bureau of Reclamation· Lakewood, Colorado· From $56kSafety and Occupational Health Specialist
Bureau of Reclamation· Grand Junction, Colorado· From $90kRegional Liaison
Bureau of Reclamation· Sacramento, California· From $118kPlant Mechanic
Bureau of Reclamation· Twin Lakes, Colorado
More jobs in Mills
Credentialing and Provider Enrollment Specialist
Carolina Nephrology PA· Mills· $52k – $56kJunior Sales Representative
RISE Financial Group· Mills, WYLine Operator - Mills, WY - Day Shift
WL Plastics· Mills, WY, United States· $44k – $50kService Manager
RDO Equipment Co.· Mills, WY, United StatesDelivery Truck Driver - CDL Class A + Safe Driver Incentive
Ferguson Enterprises· Mills, WY· From $60k