Manual Welder
Job description
Department: 16 – Fabrication
Hours: 1st Shift (5am-3pm) and 2nd Shift (3pm-1:30am), Monday through Thursday (overtime hours as needed)
Summary:
A Manual Welder is responsible for executing accurate welding of various materials and thicknesses to fit the specifications of our customers.
Responsibilities:
- Safely set up parts for welding using hand tools, clamps, jigs, and fixtures
- Read and interpret blueprints
- Align, position and fit components into fixtures as instructed
- Set up operation of automated equipment
- Ensure work meets quality standards
- Keep work area clean and organized
- Additional duties as assigned
Qualifications:
- Proficient ability in various welding techniques (MIG, TIG, etc.)
- Ability to read blueprints
- Welding experience or trade school welding program required
- Successful completion of an in-house weld test
- Ability to read tape measure accurately
- Great work ethic and attendance
- Strong attention to detail
- Ability to lift 45 lbs
- High school diploma or GED required
Job Exposures:
| Condition | Yes | No | | Condition | Yes | No | | -------------------- | --- | -- | | ---------------------- | --- | -- | | Standing on Concrete | X | | | Vibration | X | | | Extreme Heat | X | | | Excessive Noise | X | | | Extreme Cold | | X | | Working Outside | | X | | Uneven Ground | | X | | Working at Heights | | X | | Dust/Fumes | X | | | Working with Machinery | X | | | Wet Surfaces | | X | | Cramped Areas | X | |
Required PPE:
- Safety glasses
- Steel toed boots
- Denim pants long enough to cover ankles
- Special attire-hood required for all welding
- Special attire-PAPR if welding aluminum
Body Positions & Work Activities:
- N=Never: not a part of the job
- O=Occasionally: up to 2.5 hours OR 1-100 repetitions per 8 hour shift
- F=Frequently: 2.5-5.25 hours OR 101-500 repetitions per 8 hour shift
- C=Constantly: more than 5.25 hours OR more than 500 repetitions per 8 hour shift
- The above definitions need to be adjusted accordingly to describe shifts of other lengths.
| Position|N|O|F|C| |Position|N|O|F|C | | -------------------- | ----- | ----- | ----- | ----- | | -------------------- | ----- | ----- | ----- | ----- | | Sitting | X | | | | | Balancing | | X | | | | Standing Still | | | X | | | Gripping | | | | X | | Standing/Walking | | | X | | | Pinching | | | | X | | Bend | | X | | | | Climb Stairs | | X | | | | Stoop (partial bend) | | X | | | | Climb Ladders | | X | | | | Squat | | X | | | | Drive | X | | | | | Twist/Turn | | X | | | | Reach Above Shoulder | | X | | | | Kneel | X | | | | | Computer Work | | X | | | | Crawl | X | | | | | Foot Controls | X | | | |
Material Handling:
- N=Never: not a part of the job
- O=Occasionally: up to 2.5 hours OR 1-100 repetitions per 8 hour shift
- F=Frequently: 2.5-5.25 hours OR 101-500 repetitions per 8 hour shift
- C=Constantly: more than 5.25 hours OR more than 500 repetitions per 8 hour shift
- The above definitions need to be adjusted accordingly to describe shifts of other lengths.
| Activity | N | O | F | C | Notes |
|---|---|---|---|---|---|
| Lift: Floor level | X | Lift individual parts for welding. Hoist available for heavier parts. Can work at self selected height. Spools of lead up to 45# to restock MIG welders-can be lifted and then carted instead of being carried. Lifting of 3 pound lead for steel, 10 pounds for aluminum to heights at shoulder level or higher | |||
| Lift: Waist Level | X | ||||
| Lift: Chest/Shoulder Level | X | ||||
| Lift: Above Shoulder | X | ||||
| Carry: Two Hands | X | ||||
| Carry: One Hand | X | ||||
| Reaching | X | Reaching to work on adjustable height table or on standard table. Standard table is 38 inches high with shelf at 62.5 inches. Often requires reaching away from and across body. | |||
| Walking | X | Within booth and to/from computer. Maximum of 180 feet at one time. | |||
| Push/Pull | X | Operate pallet jack |
Note: While this position does not typically require lifting beyond 50 pounds, MiTM has established a company guideline stating that for items weighing over 50 pounds, it is expected that employees will use a multi-person lift or equipment designed for lifting.
Description copied from Mi-T-M's careers page. Read the full posting before you apply.
More jobs at Mi-T-M
Assembler
Mi-T-M· Peosta, IA, United StatesRobotic Welder
Mi-T-M· Peosta, IA, United StatesPaint Line Utility
Mi-T-M· Peosta, IA, United StatesFabrication Account Manager
Mi-T-M· Peosta, IA, United StatesSales Support Representative
Mi-T-M· Peosta, IA, United States
More jobs in Peosta
1st Shift Material Handler - UPA-Peosta, IA
Michelin· Peosta, IAQuality Assurance Specialist - 2nd Shift
Katalystsystemsimpact· Peosta, Iowa· $42k – $52kCity Driver
FedEx Freight· Peosta, Iowa, United States· $78kPeosta-Assistant Store Manager Kwik Stop
Gokwikstop· Peosta, IA, United States· $40k – $44kTeam Member Dairy Queen
Dairyqueen· Peosta, IA, United States· $23k – $31k