Site Mech. Rotating QC Inspector

Job Description Position AGUP Phase 2 – CPF-2 Site Mechanical Rotating QC Inspector (M/F) The Mechanical & Rotating QC Inspector is responsible for monitoring, supervising, and controlling all Quality Control activities related to mechanical static and rotating equipment within the AGUP2 Project – CPF2 Package. He ensures that all contractual, technical, and quality requirements are properly implemented by the Contractor and Subcontractors during Construction, Pre-commissioning, and Commissioning phases.

The position reports directly to the CPF2 Site QC Superintendent and works closely with Construction, Commissioning, QC disciplines, Vendors, and Contractor/Subcontractor teams. Main Missions & Responsibilities Daily Inspection & Reporting Monitor and record all rotating equipment activities on a daily basis. Conduct routine inspections in construction areas, equipment installation zones, and pre-commissioning areas.

Perform specific inspections on rotating machinery and associated installation activities. Provide daily updates and weekly reporting directly to the CPF2 Site QC Superintendent, covering: Inspection progress and key findings. Non-conformities and recurring defects. Critical issues requiring escalation or arbitration.

Status of corrective actions. Quality trends and contractor performance indicators. Contribute actively to daily/weekly QC coordination meetings and ensure the QC Superintendent receives all relevant data for consolidated site reporting. Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation enabling full visibility for the QC Superintendent.

Rotating Equipment Installation & Inspection Inspect rotating equipment such as: Pumps (centrifugal, reciprocating, screw) Compressors (reciprocating, centrifugal) Turbines Electric motors Blowers and fans Responsibilities include: Verify foundations, grout, anchor bolts, leveling, and mounting conditions for rotating equipment.

Check alignment (cold/hot), coupling installation, run-out, and shaft rotation. Verify lubrication systems, mechanical seals, and auxiliary systems. Review and validate inspection reports, punch lists, and test results (vibration, performance, run-in). Ensure compliance with vendor documentation, project specifications, and industry standards.

Pre-Commissioning & Commissioning Witness and verify rotating equipment pre-commissioning activities: Oil flushing Lubrication system checks Motor solo-run Direction of rotation Alignment verification Participate in commissioning tests: Vibration analysis Performance testing Functional checks Ensure all rotating equipment is ready for handover to Commissioning.

Documentation & Compliance Review and comment on Contractors’ and Suppliers’ ITPs, Method Statements, and procedures. Ensure proper implementation of approved drawings, QC plans, surveillance plans, and ITPs. Verify vendor documentation, equipment certification files, and material certificates. Issue Quality Records, NCRs, and CARs when required.

Ensure proper traceability of inspections, tests, and mechanical completion documentation. Welding, NDT & Interfaces (Only where rotating equipment interfaces with piping or structural supports) Coordinate with QC Welding, NDT, Piping, and Structural teams for interface inspections. Verify NDT results related to rotating equipment supports, base-plates, and connected piping.

Ensure correct implementation of flange alignment and piping connection tolerances. Non-Conformities & Corrective Actions Identify and report non-conformities or deviations on time. Ensure corrective actions are implemented and verified. Immediately escalate critical anomalies to the QC Superintendent. Coordination & Interface Participate in daily/weekly construction and QC coordination meetings.

Interface with Construction, Commissioning, Engineering, Vendors, and Contractor QC teams. Support technical clarifications and design queries with Engineering when required. Participate in audits (Construction, HSE, QC) and site visits. Ensure confidentiality of all documentation under responsibility. Scope of Work – Rotating Equipment Rotating Equipment Centrifugal pumps Reciprocating pumps Screw pumps Centrifugal compressors Reciprocating compressors Gas/steam turbines Electric motors Blowers and fans Mechanical packages containing rotating components Associated Systems Alignment systems (laser, dial indicator) Lubrication systems Mechanical seals Couplings Vibration monitoring systems Auxiliary systems (cooling, sealing, lubrication) Motor control interfaces (MCC, VFD) Accountabilities To provide technical support and assistance to Company personnel, and to Contractors and Suppliers personnel as required.

To be kept informed of the project technical referential and international standards related to his area of responsibility, taking knowledge from them for application to the Project. To develop, as required, Discipline specific instructions at Construction Site. To ensure all along construction and fabrication phases that the Contractors are enforcing contractual commitments, implementing properly their Construction Plan and Objectives, and performing activities safely as per Project Specifications, Design and Codes.

Review/Ensure the correct implementation of the approved Inspection Test Plan (ITPs) according to Project requirements. Ensure strict adherence to the Company Code of Conduct, anti-corruption rules, and all Compliance requirements, performing all duties with transparency, integrity, and professionalism. Report any suspected unethical behavior immediately.

Staff managed (number of personnel): N/A Requirements Requirements Professional Experience Minimum 10 years of experience in Mechanical & Rotating QC on major Oil & Gas EPC projects. Strong experience with rotating equipment installation, alignment, and commissioning. Experience on CPF, refinery, or large industrial facilities is strongly preferred.

Demonstrated ability in resource planning, decision-making, and team coordination. Technical Competencies Solid knowledge of rotating equipment (pumps, compressors, turbines, motors, fans). Strong understanding of mechanical installation requirements (alignment, foundations, couplings). Ability to interpret standards, codes, specifications, and technical drawings.

Proficiency with measuring instruments (micrometers, calipers, dial indicators, laser alignment tools). Knowledge of vibration analysis and performance testing. Understanding of NCR, deviation, and concession processes. Familiarity with digital QC systems (Aconex, SharePoint, Smart. Plant, or equivalent) is a plus. Behavioral Competencies Exemplary behavior regarding Company Code of Conduct and HSSE rules.

Ensure that all HSSE training are completed and HSE rules implemented within his area of responsibility. Ability to represent the Company in discussions and meetings with Vendors, Contractors, and Subcontractors. High attention to detail and strong reporting discipline. Ability to work autonomously in a harsh, remote site environment.

Leadership, team spirit, and resilience under pressure. Ability to transfer knowledge to team members. Fluent English (mandatory).